What mistakes should be avoided when operating bottled drinking water filling equipment？

The application of Bottled drinking water filling machine has improved the production efficiency of production enterprises, brought convenience and speed, and won the favor of production enterprises. Production enterprises should avoid wrong operation when using it. Only in this way can they do a better job of operation. Then production enterprises should pay attention to the correct way when operating, and do not make any negligence.

1. Inspection before operation of bottled drinking water filling equipment: After the equipment is assembled, turn on the power supply, test run the three-phase motor, ensure the correct running direction, ensure the pressure and flow of compressed air, check whether each motor, bearing, etc. needs to be lubricated, and it is not allowed to run without oil. Under normal circumstances, the machine can be started later. At the same time, observe whether the fasteners of each part are loose. After the operating conditions of each part are stable, it can be used normally.

2. Check whether there are any problems with the performance of safety equipment.

3. Before starting the bottled drinking water filling equipment, carefully check whether there is water in all water tanks, whether the chain plate is stuck, whether there are debris on the conveyor belt, whether there are bottle caps in the cap box, and whether there are several barrels of water, power, and gas sources. After all parts are ready, turn on the main power, the power indicator light is on, the fault indicator light and the emergency stop indicator light are not on, then the start conditions are met, press the start button on the control box and the start switch at the filling place, after three beeps, the whole machine starts running, enters the automatic operation mode of bottle washing, rinsing, and filling, and stops by pressing the stop button at the filling place and the control box, and shuts down the main power.

---

 Safety rules for the operation of bottled drinking water filling equipment:

1. There are no foreign objects (such as tools, rags, etc.) in the liquid filling machine.

2. The liquid filling machine must not have abnormal noises (if there are, it should be stopped immediately and the cause should be checked).

3. All protective equipment should be safe and reliable. Foreign objects (such as scarves, bracelets, watches, etc.) that may be caught by moving parts are not allowed to be worn.

4. Operators with long hair should wear a cap.

5. Do not use water or other liquids to clean the electrical unit.

6. Wear work clothes, gloves, glasses, etc. when cleaning to prevent strong acid and alkali corrosion.

7. When the equipment is running, someone must supervise it to avoid tools or other items approaching the equipment.

8. Do not let people who are not related to the operation approach the equipment.