MOB:0086-13962254616 |  Email: sales@fillingmachinegroup.com
You are here: Home » Products » Shrink Wrapping Packing Machine » One-piece Carton Packaging Machine-02

Product Category

Contact Us
Share to:

One-piece Carton Packaging Machine-02

The equipment consists of the bottle conveyor part, the bottle falling part, the cardboard storage delivery part, the carton forming packaging part, the main transmission part, the pneumatic part and the electric control part.

Packaging products: bottle / cans
Packaging specification: 4x6
Packaging speed: 15-18 boxes / min (equipment speed)
Packaging form: single-chip carton package (packaging carton can be pre-loaded with plastic handle, easy to carry.)
Availability:
Quantity:
  • YZCP-20
  • JDY
  • 84223010

One-piece carton packaging machine--YZCP-20

l Project Profile:

The equipment consists of the bottle conveyor part, the bottle falling part, the cardboard storage delivery part, the carton forming packaging part, the main transmission part, the pneumatic part and the electric control part.

l Packaging products: bottle / cans

l Packaging specification: 4x6

l Packaging speed: 15-18 boxes / min (equipment speed)

l Packaging form: single-chip carton package (packaging carton can be pre-loaded with plastic handle, easy to carry.)

carton packing machine01

carton packing machine02

carton packing machine03

Technical description

1). Structural composition

The equipment consists of the inlet bottle (can) conveyor part, the bottle (can) group falling part, the cardboard storage delivery part, the carton forming packaging part, the main transmission part, the pneumatic part and the electric control part

2) Structure and functional principle of the equipment:

A) Inlet-bottle conveyor structure

l Low impact inlet bottle (can):

l The inlet conveyor belt is driven by a frequency conversion motor and adopts POM network with flat top chain transmission;

l It is provided with a connection to the equipment and controlled by the control motor to ensure smooth access of channels;

l The arrangement and quantity of the bottles are controlled by the sensor at the top of the conveyor belt.

B) Bottle group drop-down mechanism:

Bottle separation adopts displacement type, the bottle is divided by the packaging required package, and then enter the falling mechanism, The bottle plate of the separator is misplaced with the bottom leakage net, the cylinder pushes the bottle separator, the upper and lower holes are aligned, and the bottle falls on the cardboard.

C) Delivery of cardboard:

l The board is removed from four suction cups from the board warehouse piece by piece, sent through the board transport belt to directly below the falling mechanism. The bottle falls on the board, and the whole is pushed by the main transmission chain push plate to the plastic shaping mechanism to complete a packaging combination;

l The board warehouse can be sized according to the package combination to correspond to the board size;

l The sensor detects whether the missing bottle and the cardboard are in place.

D) Formation and bonding of the carton:

The board is sent from the side of the machine channel, and then folded into "L" shape, wrap the bottle, and then surround from the top down, the inner wing is sprayed with hot sol, the outer wing is folded and pressed by the pneumatic device, the slender upper wing is closed by the upper pressure plate, the forming carton is sent by the intermittent chain of the machine shaft; especially equipped with clutch protection function, the clutch will automatically separate the machine and start after troubleshooting.


3). Electrical appliance combination structure:

A) operating system

l Automatic PLC control, proprietary operation interface LCD display, can display the cumulative number of packaging.

l Replacement of the setup programs is faster and more accurate.

l The control panel uses an electronic light touch touch screen, which can directly input and modify the parameters of the packaging variety, and can also store the parameters of many different packaging specifications.

B) Advanced control system

l Monitor the operation of the equipment in real time.All working steps have sensors to detect, have automatic diagnosis function, when any error occurs, the equipment automatically stops, the alarm lights shine, and the error type is displayed on the operating screen.

l Has a switch logic interlock with the external equipment.

l All electrical and gas controls are consistent with the latest international application standards (CE standards).

4). Mechanical combination structure

Excellent mechanical performance:

Mechanical parts include stainless steel, carbon steel, chrome-plated steel and aluminum alloy with strong corrosion resistance; excellent surface spraying quality and strong rust prevention performance.

Have a complete safety device, safe and reliable and meet the safety standards.

5) Main technical parameters:

Total weight of machine:

About 2,500 kg

supply voltage:

Three-phase and five-phase lines are 380 V 50HZ

control voltage:

24 V  DC/AC

power:

7 KW

Compressed air consumption:

600 NL/Min

Compressed air pressure:

0.6-0.8 Mpa

Packing speed

18 Pack / minute

Sheet form:

Pre-cut and set flat cardboard

Paper board set:

horizontal

Height of the inlet bottle delivery line

1050mm+/- 50

Height of the outgoing box delivery line

800mm+/- 50

Mechanical size

L5130*W2600*H1800

6) Technical requirements for raw carton materials:

Kraft paper on outer surface:

From 120 to 180 g / m 2

Kraft paper on inner surface

From 130 to 150 g / m 2

rill:

Mixed chemical coating (+ / -120 gr / m²)

7). Hot-up sol:

melting point:

120℃

interval:

1 ~ 2 seconds

Solidification time:

Immediately solidification

working temperature:

About 160 ℃

Main electrical configuration

Part name

Adopt technology

brand

Operation screen

Germany

SIEMENS

PLC

Germany

SIEMENS

frequency transformer

Germany

SIEMENS

Cam locator

Japan

OMRON

Low voltage electrical

France

Schneider

photoelectric switch

Germany

Leuze

Pneumatic cylinder

Taiwan

AirTAC

electromagnetic valve

Taiwan

AirTAC

sucker

Taiwan

AirTAC

001


Links

Product Category

Contact Us

MOB:0086-13962254616  
Email: sales@fillingmachinegroup.com 
whatsapp:008613962254616 always online!

 Copyrights 2020 Suzhou Jindayuan Filling Machinery Co.ltd All rights reserved. Site Map. Technology by Leadong