Gantry palletizer machine MH-D W-1000D

 

Low-frame palletizers are also called gantry palletizers (low-position palletizers). The palletizing frame lifts smoothly and has stable performance. The stacker frame of the low-rack stacker is mainly a steel structure welded from large square steel, and its shape is a gantry frame structure with a base. Other components of the stacker are installed and carried on the frame, and two uprights of the frame are respectively provided with steel guide rails for lifting the lifting frame. The stacking range of low-position palletizer is 1000～1200 packs/h. It is suitable for stacking various staggered boxes in the post-packaging process of beer, beverage, food, daily chemical, electronics and other industries. The packaging materials can be cartons, plastic boxes, pallets, heat shrinkable films, etc. Can choose high or low into the box. It can be used as an unboxing stacker through simple adjustment and program setting.

The main components of the low-rack palletizer: The low-rack palletizer is composed of multiple stand-alone equipment, and its main stand-alone equipment includes: pallet warehouse, pallet conveyor, pallet conveyor, stacker, marshalling machine, push charter, Indexer and control system.

Technical parameters

1. Power: 380V,50Hz, 20.2KW

2. Air pressure: 5.5kg/cm⊃2;

3. Production speed: about 12-18 boxes / min

4. Device efficiency:> 98%

5. Product stacking quality: carton from the center deviation ≤ 2 ㎜

6. Operating noise: ≤ 75 dB

7. Stacking mode: carton: 4×4 boxes, 16 boxes per layer, 5 layers in height (which can be customized according to customer needs);

8. Stack size: L × W × H:11000*1100*150 mm or customized as required. Carton size: as per company requirements

9. Components: shunt belt conveyor system, row conveyor system, main push device, stack host, stack distributor, roller conveyor system, main electrical control cabinet, safety protection block, etc. ( Red part now not include this price, because the conveyor system according to workshop use.)

10. Electrical configuration

1) Voltage 380V ± 10% (50HZ 3PH + PE); control voltage 24VDC;

2) Electrical cabinet protection grade IP54; push-button protection grade IP65; low-voltage electrical element protection grade IP67;

3) Low voltage electrical components (contactor 3TF, relay, circuit breaker, push buttons, etc.) adopt French "Schneider";

4)  Intermediate relay adopts the French "Schneider";

5)  Terminal adopts WEDIMELER products;

6)  Peripheral sensors (photoelectric switch, proximity switch, etc.) adopt the Korean "Autonics";

7) Pneumatic components adopt Taiwan "Yadeck" products;

8) Solenoid valve adopts "Yadeck" products;

9) Programmable controller adopts the French "Schneider";

10) Frequency converter adopts the French "Schneider";

11) Motors adopts Siemens motor;  

12) Other electrical configuration follows IEC529 standard, not less than IP54.